 | Schuld Mfg Complete 10 Silo Resin System Aluminum
$65000.00 |
|
|  | BAND HEATER 12"X2" 1600W/240V.
$15.00 |
|
|
 | Lot (5) NICE Polymer Systems 10 hp Auger Granulators
$14999.00 |
|
|  | Mini-Jector Injection Molding Machine
$2500.00 |
|
|
 | BAND HEATER 7"X2" 950W/240V.
$15.00 |
|
|  | BRAND NEW INJECTION MOLDING MACHINE (HOPPER DRYER)
$795.00 |
|
|
 | MX-1000 Mixing Nozzle Tip; 7/8"-14 Thread, 3/4" Radius
$240.00 |
|
|  | BAND HEATER 12"X2" 1600W/240V.
$15.00 |
|
|
 | Engel Tiebarless Electric 2001 Injection Molding Press
$36900.00 |
|
|  | Rexroth 5003 Prop Amp Card Pressure Control Van Dorn
$49.00 |
|
|
 | Injection Molding Machine, Sumitomo 220 Ton 1993
$9500.00 |
|
|  | Hot Oil Unit Matsui MCN-60A
$3000.00 |
|
|
 | MX-4000 Injection Molding Mixing Nozzle Assembly
$480.00 |
|
|  | BAND HEATER 8"X1 1/2" 800W/240V.
$15.00 |
|
|
 | Injection Molding Machine 30 Ton, 1.2 oz, Shinwa-Seiki
$6000.00 |
|
|  | Arburg 55 Ton Injection Molding Machine 1988 5.58 shot
$2500.00 |
|
|
 | 1992 VAN DORN 85-TON PLASTIC INJECTION MOLDING MACHINE
$8850.00 |
|
|  | BAND HEATER 9"X2" 1200W/240V
$15.00 |
|
|
 | MG-4000 Injection Molding Mixing Nozzle Assembly
$480.00 |
|
|  | DUAL HYDROLIC REFILL PUMP FOR INJECTION MOLDING MACHINE
$1300.00 |
|
|
 | CAMARO Inner padded Pillar post mouldings OER 68 BLACK
$29.99 |
|
|  | Conair/Maguire Weigh Batch Blender GBSL42
$3500.00 |
|
|
 | Reed Injection Mold Purple Handel I/0 Card, SB209032A-R
$100.00 |
|
|  | Reed Injection Mold Green Handel I/0 Card, SB209031BR
$100.00 |
|
|
 | UNA DYN 1500 LB HOPPER FOR INJECTION MOLDING
$950.00 |
|
|  | Plastic Resin, 14% GF Nylon 6/6 Zytel 8018 Black 770#
$100.00 |
|
|
 | Arid-X Dri-Air Desiccant Plastic Pellet Dryer New Cond.
$4850.00 |
|
|  | BAND HEATER 9 1/2"X1 1/2" 950W/240V.
$15.00 |
|
|
 | BAND HEATER 6"X2" 800W/240V.
$15.00 |
|
|  | thermoformer thermoforming vacuform vacuuform
$649.00 |
|
|
 | BAND HEATER 9 1/2"X1 1/2" 950W/240V.
$15.00 |
|
|  | Rexroth 5011 Amp Card For Volume Control off Van Dorn
$39.00 |
|
|
 | (2) ConAir Aluminum RESIN SILO 42,400 Pound Capacity
$33500.00 |
|
|  | EMI Stainless Steel water manifolds
$69.00 |
|
|
 | Simplomatic Plasticor PLA-63 Plastic Injection Molder
$2000.00 |
|
|  | BRAND NEW INJECTION MOLDING MACHINE (HOPPER DRYER)
$695.00 |
|
|
 | Dyco Automatic Bagger / Packer EXCELLENT CONDITION !!
$55000.00 |
|
|  | BAND HEATER 8"X2" 1100W/240V.
$15.00 |
|
|
 | BAND HEATER 6"X2" 800W/240V.
$15.00 |
|
|  | Hot Oil Unit Matsui MC. JET III-X
$2500.00 |
|
|
 | LOGIC SEAL- THE STOP LEAKER
$295.00 |
|
|  | BAND HEATER 6"X2" 800W/240V.
$15.00 |
|
|
 | CAMARO Inner padded Pillar post mouldings OER 69 BLACK
$29.99 |
|
|  | Reed Injection Mold Purple Handel I/0 Card, SB209032A-R
$100.00 |
|
|
 | Jomar 65 Ton Blow Molding Machine,2000
$29500.00 |
|
|  | SIMCO CHARGEMASTER CH-30-N
$899.00 |
|
|
 | Reed Injection Mold Black Handel I/0 Card, SB209030CR
$100.00 |
|
|  | BAND HEATER 4"X2" 500W/240V
$15.00 |
|
|
 | DME Jiffy-Shot model MS-101 Mold Sampler 70-125psi 110v
$120.00 |
|
|  | Vacuum Forming Machine - Plastic Model Mold Form Former
$89.95 |
|
|
 | Reed Injection Mold Yellow Handel I/0 Card, SB209033-C
$100.00 |
|
|  | MS-4000 Injection Molding Mixing Nozzle Assembly
$480.00 |
|
|
 | Future Controls mold sampler
$9.99 |
|
|  | Autojector 30 Ton HS-30S Vertical Molding Machine
$1.00 |
|
|
 | IMS Hopper Loader for plastics injection molding
$99.99 |
|
|  | (3) ConAir Aluminum RESIN SILO 272,440 Pound Capacity
$53500.00 |
|
|
 | 10" inch head tooling blow molding plastics
$500.00 |
|
|  | Production Tools for Plastic Injection Molding
$150000.00 |
|
|
 | Screw and Barrel for Kawaguchi NEW Xaloy NEW 50mm
$3650.00 |
|
|  | Toshiba 120Ton Injection Molding Press
$5000.00 |
|
|
 | Incoe Corp. Heated Bushing w/Thermocouple XRH-8270A
$99.00 |
|
|  | Plastic Resin, Black Nylon RTP ESD C 203H High Impact
$3800.00 |
|
|
 | Newbury 30 Ton V430ARS Vertical Molding Machines
$1.00 |
|
|  | Reed Injection Mold Green Handel I/0 Card, SB209031BR
$100.00 |
|
|
 | INJECTION MOLDING MACHINE ROLENN BRAND W/CONTRLOLLER
$3000.00 |
|
|  | SIMCO CHARGEMASTER CH-30-N WITH LINEAR PINNER!!!!
$1699.00 |
|
|
 | AIS Semi-Automatic Bagger / Packer EXCELLENT !!
$24500.00 |
|
|  | Set of 4 Mold Clamps/ Bolts & Washers
$0.99 |
|
|
 | NICE AEC Nomad PDQ3 100 Lbs/hr cfm Dryer 400 Lb Hopper
$5500.00 |
|
|  | 5" head tooling blow molding plastics
$400.00 |
|
|
 | BUDZAR 20 TON WATER CHILLER FOR INJECTION MOLDING
$7500.00 |
|
|  | Formtech vacuform machine / table top vacuum forming
$1500.00 |
|
|
 | BAND HEATER 4"X2" 500W/240V
$15.00 |
|
|  | CINCINNATI INJECTION MOLDING PRESS
$13500.00 |
|
|
 | DME Jiffy-Shot model MS-101 Mold Sampler 70-125psi 110v
$150.00 |
|
|  | BAND HEATER 8 1/2"X2" 800W/240V.
$15.00 |
|
|
 | Jomar Injection Blow mold molding Model 85S (1994)
$85000.00 |
|
|  | Injection molding machines
$4750.00 |
|
|
 | Reed Injection Mold Yellow Handel I/0 Card, SB209033-C
$100.00 |
|
|  | ADS Vacuum Former 2800 -=- 18" x 12"
$49.99 |
|
|
 | STRIP HEATER 9 1/2" LX1.4" 200W/115V
$15.00 |
|
|  | BAND HEATER 4"X2" 500W/240V
$15.00 |
|
|
 | HYTROL CONVEYER FOR INJECTION MOLDING PARTS
$800.00 |
|
|  | NICE DR. BOY 15 TON INJECTION MOLDING MACHINE MODEL 15
$2989.00 |
|
|
 | BAND HEATER 9"X2" 1200W/240V
$15.00 |
|
|  | BAND HEATER 11"X2" 1500W/240V.
$15.00 |
|
|
 | A Plastic Injection Molding Attachment for Drill Press
$17.95 |
|
|  | BAND HEATER 11"X2" 1500W/240V.
$15.00 |
|
|
 | BAND HEATER 8"X1 1/2" 800W/240V.
$15.00 |
|
|  | BAND HEATER 8 1/2"X2" 800W/240V.
$15.00 |
|
|
 | Hot Oil Unit Mokon MK2Z18G7 18 KW
$3500.00 |
|
|  | Newbury 75 ton vertical injection molding machine
$13900.00 |
|
|
 | plastic pipe injection pin and bushing
$500.00 |
|
|  | Nice Autojectors 10 ton Vertical Molding Machine Molde
$9900.00 |
|
|
 | BAND HEATER 7"X2" 950W/240V.
$15.00 |
|
|  | MX-1000 Mixing Nozzle Tip; 7/8"-14 Thread, 1/2" Radius
$240.00 |
|
|
 | BAND HEATER 8 1/2"X2 1/2" 1600W/240V.
$15.00 |
|
|  | BAND HEATER 6"X2" 800W/240V.
$15.00 |
|
|
 | BRAND NEW 45 TON VERTICAL INJECTION MOLDING MACHINE
$26500.00 |
|
|  | BAND HEATER 8"X2" 1100W/240V.
$15.00 |
|
|